Then we can suggest a solution that particular problem. Lots of us record straight into our laptops using the onboard sound card to take the microphone input, deal with that inputted sound, and then push both the new sounds and the backing tracks out to us through the headphone jack.
This makes it nearly impossible to record anything intricate, such as a piano solo or fingerpicking on a guitar due to the mismatch between you plucking a string and actually hearing it played back. In this case, the solution is to score an audio interface that has a zero latency monitoring system also known as 'hardware monitoring' that will route the sound the microphone picks up and push it right out of the headphone output on the interface, completely dodging the converter and computer software.
This is preferable because you'll have access to a preamplifier for the microphone, which is non-negotiable for any microphone. USB microphones have them built in, but they're cheaper and lower quality. Another plus is you can choose an interface with multiple inputs, outputs, MIDI jacks, and more. If you need to explore this path, check out our picks for best audio interface in various budget ranges. Let's say you're the keyboardist in your band and the only member lugging around a laptop to use software plugins instead of guitar pedals or rack-mounted sound banks.
The sound guy then hooks into the output of the amp to run you into the mixer with the rest of your band. First and foremost, let me point out that there are a few prerequisites here. We're assuming you aren't using an ancient computer with a hard drive with slower than RPMs, a CPU that can barely handle checking email and browsing the net, and that you aren't sitting on something with less than 4 GB of RAM. If you're desktop or laptop is relatively new, since or so, you're likely okay in this department.
The other issue is that you need to ensure that you've installed and chosen the correct drivers for your audio interface or digital mixer in your DAW.
Using any pre-installed generic drivers or whatever is default chosen for plug-and-play USB ports is going to cause miscommunications and latency problems. Drivers are like the bridge between software and hardware.
Usually the recording interface will come with an installation disc or directions to go to the manufacturer's website to find the drivers. Make sure you take care of this! The obvious solution would be to stay in the hardware realm and use a hardware synthesizer and racked sound banks from popular keyboards.
But we're not all made out of money, so we've got to figure out how to find the balance between the CPU and the buffer so we don't get kicked out of the band. You're in a pickle, because you likely need a high buffer amount in order to offload some work from the CPU, but this increases latency. You'd use a lower buffer and make the CPU work harder but the problem here is that the CPU has to live calculate all of the equalization, compression, flanger, and reverb effects you're running through.
That's not even considering grabbing sounds from the hard drive and storing it in the RAM, directing traffic in and out of the DAW, etc. You'll have to experiment with the settings we discuss in the next section to find the sweet spot, and if it's not good enough you'll have to give up some effects. Reverb is a demanding one that you can move to a foot pedal. That one inexpensive change could make the difference. The other option is to purchase a computer with a much faster and powerful processor and more RAM, but again that's hardly ever an option.
As shown above, if you find that you're experiencing a consistent amount of latency between your performance and how it appears in your multitrack, then you can tell your DAW to apply a 'delay compensation' of that amount. It will automatically nudge your tracks forward for you by that amount of time. It is possible in the best DAWs to set up delay compensation for individual plugins and tracks as well.
Here is an example of making this happen in Logic Pro X. There's a boatload of work going on in every part of your computer in order to record or playback a constant stream of live audio, and even more so once you start tacking on effects like reverb.
Without a buffer it would be impossible to keep this stream flowing smoothly without errors, but with a buffer comes the unavoidable problem of latency. Your DAW provides you with buffer settings that instruct your computer's RAM to partition off a portion of this memory for use in storing a part of this constant stream of audio samples.
They will not disappoint you in capturing online meetings, video calls, game videos, etc. Joyoshare VidiKit - Screen Recorder could be considered the top-notch screen capture software that can record desktop actions with no lag, no time limit, and no watermark. This recording tool is available for both Windows and Mac operating systems. After installation, you are able to use it to capture gameplay or any other live streaming videos in p with system audio as well as microphone.
This program provides a series of flexible settings so as to meet your various demands as well as ensure a smooth recording. Other than that, this first-rate video recorder also can help you download online music, make tutorial videos, take screencasts, etc.
Another utility that is worthy your consideration is ScreenRec, which is a free no lag screen recorder for Windows, Mac, and Linux computers. It allows you to capture screen with computer sound and your voice with no lag in one click. More surprisingly, it is capable of recording webcam, which a few similar competitors fail to achieve.
Best of all, ScreenRec is packed with a wide range of mature features. You can take screenshots and then use arrows to mark them up. All those functions will make your recording experience enjoyable and easier. Praised as the most intuitive and the best no lag screen recorder, it is capable of capturing almost anything on your PC screen in full HD, including live game clips, webinars, and other streaming videos.
You are also allowed to make demonstrations and presentations in high definition. What's more, its continuous technology innovations enable it to improve recording performance. To give an example, you have access to a full set of video editing functions. Really not a desirable solution, Whoop, thanks all the same though! It should just function as it was previously. Grab the trial version of Mixcraft 5, select the WaveRT driver and enable exclusive mode.
Well, I've spent about 15 hours over 3 days working on this problem, still no fix. Time to install XP again. Great upgrade to your OS, Microsoft! Nah, don't do that. Explain your hardward setup. Just analog mic plugged into 'mic in' and headphones plugged into the headphones green or orange plug? Headphones plugged into same sound card.
Also tested webcam mic usb , it also records with latency same problem. I tried on board Really wish I could remember what I did in the last installation. I checked one of my old tracks, it was recorded in so it was definitely in Windows 7, and it's perfectly on time.
I recall having the problem to begin with, and then fixing it, just not how I fixed it. After going through about 9 pages of Google, reading countless forum posts, I am losing hope!
About to install XP on another partition and just use it for recording. Any last suggestions before I do it, Pinky? Where do the fat beats come from? Generated on the computer, or input from an external device to the line in port? They're wav files entered into Cool Edit, no external sources.
You've not really said much about what you HAVE tried, are there no settings at all within cool edit pro that allow you to adjust delays? Like in virtualdub there's an audio delay option, is there nothing similar for cool edit for mic input delay?
I found this, which suggests there might be click out of curiosity, if you turn on the ability to hear what your mic hears in windows , when you tap the mic, is there a delay between what it hears and when you hear it in your headphones? I just tried with my mic and when I tap the end of it, it seems to play pretty much immediately without delay, unlike others who seem to have a delay between when they tap it and when they hear the sound I too googled your issue. Use overlay graphics to visualize the recorded mouse paths and clicks.
Record, convert, and compile your macro into an EXE-file. Assign mouse and keyboard macros into hotkeys. Use the macro editor or built-in commands to create macros. Top 3: Turnssoft Mini Mouse Macro It is a free mouse recorder that can perform macro task automation with command-line scripting and recording. Use macro scripts to schedule tasks in Mini Mouse Macro.
Control macro flow with Conditional Formatting. Set mouse macro automation for left-click, right-click, and keystrokes. Record mouse and keyboard events into script files.
Customize the configuration with a convenient settings interface. Require no programming experience. Intuitive and clean interface. Adjust trigger mode with the duration of the trigger condition, similarity, and more.
Schedule scripts with a specific time. Set the custom speed of instant macro playback. The download package is small in file size. Execute scripts at a specific time. The mouse recorder software is designed for novices with no technical experience.
Mouse Recorder Pro is free to use on Windows 98E. There is no need to install EasyClicks Macros specifically. Create shortcuts for mouse recording playback. Record mouse clicks, drag, and move individually. Safe and clean to use. Top 8: Macro Toolworks Macro Toolworks is a mouse recorder for Windows users, which has both free and professional versions.
0コメント